Stands the unit over the line, not beside it.
A taller mounting stand for the MultiCyclone range, 795 mm high. It lifts the unit clear so the pipework runs underneath rather than around it. Accessory only — the pre-filter is bought separately.
Nationwide delivery, or free collection in Benoni. Payflex available — four interest-free instalments.
The Speck MultiCyclone Stand Over Base is a mounting stand for Speck MultiCyclone pool pre-filters. It stands 795 mm high, 440 mm wide and 350 mm deep, and lifts the pre-filter clear of the pump line so the pipework can run beneath it. It is an accessory only — no pre-filter, pump or pipework is included, and it performs no filtration itself.
440 mm wide, 350 mm deep. Measure your plinth against those three figures before ordering.
A stand, and only a stand
The stand on its own. No MultiCyclone pre-filter, no pump, no filter, no pipework, and it filters nothing itself. It is here because mounting these units properly is half of whether they get maintained.
Store spec: mounting stand / stand over base accessory; pre-filter not included795 × 440 × 350 mm
Seven hundred and ninety-five millimetres high, 440 wide, 350 deep. Those are the numbers to check against your plinth — the taller Ultra units on a stand need real headroom above the pump.
Store spec: height 795 mm, width 440 mm, depth 350 mm
Pipework runs under it
Standing the unit over the line rather than next to it keeps the run shorter and the plinth tidier. The installation views in the gallery show the arrangement.
Store gallery: installation viewsThe specification, as Speck publishes it
- Product Type
- Mounting stand / stand over base accessory
- Brand
- Speck
- Product
- Speck MultiCyclone Stand Over Base
- Compatible Models
- Speck MultiCyclone 12, Speck MultiCyclone 16, Speck MultiCyclone Plus 12, Speck MultiCyclone Plus 16, Speck MultiCyclone Ultra 12, Speck MultiCyclone Ultra 16
- Purpose
- Mounts compatible Speck MultiCyclone unit over existing pool pump setup
- Height
- 795mm
- Width
- 440mm
- Depth
- 350mm
- Filtration Function
- None, stand only
- Includes Pre-Filter
- No
- Includes Pump
- No
- Includes Main Filter
- No
- Includes Pipework
- No, unless clearly stated
- Installation Labour Included
- No, unless clearly stated
- SKU
- 701.1331.119
Questions people ask about the Speck MultiCyclone Stand Over Base
What is the difference between the MC Base and the Stand Over Base?
The Stand Over Base is the taller of the two at 795 mm, and lifts the unit so pipework can run underneath it. The MC Base is the lower mounting base. Both are accessories sold without the pre-filter.
Does the Stand Over Base include the pre-filter?
No. The MultiCyclone unit is bought separately.
What is the Speck MultiCyclone Stand Over Base?
The Speck MultiCyclone Stand Over Base is an optional mounting stand used for selected Speck MultiCyclone pre-filter installations.
What does the stand over base do?
It allows a compatible Speck MultiCyclone unit to be mounted over the existing pool pump setup, helping save space on the equipment pad.
Which Speck MultiCyclone units can use this stand?
It is suitable for Speck MultiCyclone 12, Speck MultiCyclone 16, Speck MultiCyclone Plus 12, Speck MultiCyclone Plus 16, Speck MultiCyclone Ultra 12 and Speck MultiCyclone Ultra 16 units.
Is this a complete Speck MultiCyclone pre-filter?
No. This product is only the stand over base. The Speck MultiCyclone pre-filter unit is not included.
Does this stand include the pool pump?
No. The pool pump is not included.
Does this stand include pipework?
No. Pipework and plumbing fittings are not included unless clearly stated on the product page.
Does the stand over base improve filtration?
No. The stand does not filter water. It supports the installation position of a compatible Speck MultiCyclone pre-filter.
Why would I need this stand?
You may need it when the Speck MultiCyclone unit must be mounted over the pool pump to save equipment pad space or suit a specific plumbing layout.
What are the dimensions?
The listed dimensions are approximately 795mm high x 440mm wide x 350mm deep .
Can this be used with the Speck MultiCyclone 70XL Commercial?
No. Based on the supplied product information, this stand is for Speck MultiCyclone 12, 16, Plus 12, Plus 16, Ultra 12 and Ultra 16 units.
Should this be installed by a pool technician?
Yes. Professional installation is recommended to make sure the stand, pre-filter and pipework are correctly aligned and supported.
Not sure which MultiCyclone fits your system?
The right unit is the one that matches your pump’s flow rate, not the one with the most cyclones. Send us the pump and filter you already have and we will tell you which of these suits it.